Moparts

330' Time....

Posted By: superwrench

330' Time.... - 09/21/09 04:53 AM


The small track up here in Victoria is only 400' long, so all you get is a 60' and a 330' time to go by.
On one run today, my Pink Pig laid down a 1.51 60' and a 4.392 330'.
What does that 330' time equate to as an approximate 1/4 time? I'm thinking in the 10.80 range.
Posted By: Triple Threat

Re: 330' Time.... - 09/21/09 05:37 AM

All cars are a little different, the Easiest and most accurate way to figure it out is to compare it to your timeslips from a 1/4 mile track, like the info you got from pinks here at pacific.

-Dustin
Posted By: RobX4406

Re: 330' Time.... - 09/21/09 06:16 AM

Try this:

http://www.wallaceracing.com/etcalc.php
Posted By: rowin4

Re: 330' Time.... - 09/21/09 02:13 PM

Now that is a good piece of info to have. It'll get you in the ball park of were you should be. Now that I find I'm .3 off in my et per 60 ft. vs mph , it's back to work

© 2024 Moparts Forums