Which intake?

Posted By: Sledge_57

Which intake? - 09/12/09 05:01 PM

I'm thinking of experimenting with a single plane intake on my heap, which one do you guys like best?

470 - low deck
10.1
585 lift, 259@.050 duration solid lifter
4250 - 4500 converter
4.30 gears
850 MD carb (for now........)

Thanks

Posted By: mac56

Re: Which intake? - 09/12/09 05:08 PM

edelbrock victor

Posted By: super451b

Re: Which intake? - 09/12/09 05:12 PM

I'm using a TM-6 on my 451 (also used it on the 383 in sig) I also tried an M-1, and a Torker . The TM-6 was a little better than the M-1 and a good bit better than the Torker.

Posted By: Sledge_57

Re: Which intake? - 09/12/09 05:14 PM

Quote:

I'm using a TM-6 on my 451 (also used it on the 383 in sig) I also tried an M-1, and a Torker . The TM-6 was a little better than the M-1 and a good bit better than the Torker.

TM-6 the old Tarantula intake?

Thinking about the Victor or M1, leaning toward Victor at the moment............

Posted By: super451b

Re: Which intake? - 09/12/09 05:22 PM

Yes , the old Tarantula. I don't have any real world experience with the Victor yet.

Posted By: BDS871Cuda

Re: Which intake? - 09/12/09 05:44 PM

Quote:

I'm thinking of experimenting with a single plane intake on my heap, which one do you guys like best?

470 - low deck
10.1
585 lift, [Email]259@.050[/Email] duration solid lifter
4250 - 4500 converter
4.30 gears
850 MD carb (for now........)

Thanks

A lot of my stuff was close to yours.
440 10.5-1/ Ultradyn .590-.613/ 4500 stall
4.88 D-60 with 31X18.5 QTP's
825 Race Demon/ MDS/ M-1 intake/ car ran 11.16
The M-1 seem to make good power up to 6300 rpm.

I would think the Victor should do just as good.
I picked the M-1 so it would fit under my hood.

Attached picture 5478146-Trump_lg.jpg

Posted By: BSB67

Re: Which intake? - 09/13/09 12:07 PM

What carb and intake do you have now?

Posted By: Sledge_57

Re: Which intake? - 09/13/09 11:49 PM

Quote:

What carb and intake do you have now?

Performer RPM and BG MD-850

Posted By: racerAL

Re: Which intake? - 09/14/09 12:24 AM

Quote:

Quote:

What carb and intake do you have now?

Performer RPM and BG MD-850

hey Sledge -..are you go to Norwalk this week-end?...if so i have a M1 that your welcome to try....i ran 11.30's-40's with it..i recently switched and it's just sitting on the shelf..let me know

Posted By: Sledge_57

Re: Which intake? - 09/14/09 01:05 AM

Quote:

Quote:

Quote:

What carb and intake do you have now?

Performer RPM and BG MD-850

hey Sledge -..are you go to Norwalk this week-end?...if so i have a M1 that your welcome to try....i ran 11.30's-40's with it..i recently switched and it's just sitting on the shelf..let me know

Thanks for the offer, I might be at Norwalk but the car will not for sure.

I think I have a job in the area at the end of the week, if so I will be dropping in.

Norwalk would be a heck of a drive from my house with 4.30 gears

Thanks again for the offer