Who's & where to get...building headers

Posted By: 72Challenger

Who's & where to get...building headers - 08/31/09 01:58 PM

Need to built a set of headers for my current project (70 challenger) as shelved header won't fit the chassis / framerails. Anybody got an idea of where to get a set of flanges and collectors or some "header building kit". Think I need 2.1/4 primairies.

Thanks again,
Hans

Posted By: Anonymous

Post deleted by Defbob - 08/31/09 03:25 PM

Posted By: 70dusterjohn

Re: Who's & where to get...building headers - 08/31/09 03:26 PM

Did that on my brothers car.. Worked out great...

Posted By: BBLM23

Re: Who's & where to get...building headers - 08/31/09 03:29 PM

Quote:

Hooker makes a weld up B/B Chevy kit in different size tubes.Then you can get Mopar flanges and it works out nice

Wrong angles for big block Mopar. I sent it back ordered Mopar flanges, individual bends and better collectors.

Posted By: 70dusterjohn

Re: Who's & where to get...building headers - 08/31/09 03:48 PM

It wasn't a big deal in my brothers car.. It didn't have fender wells, and he already had the collectors that he need to run.. I was just easier to get the big tubes, and not pay 1000 dollars for bends.. We did have the flanges already..

Posted By: RobX4406

Re: Who's & where to get...building headers - 08/31/09 03:53 PM

http://www.schoenfeldheaders.com/mflanges.htm
http://www.mandrel-bends.com/catalog/
http://www.spdexhaust.com/BendsB.html

http://www.burnsstainless.com/