caltracs & monoleaf users

Is it a must to use a bolt trough the ears on the leafs to clamp them or is it optional?
I have no idea of what spring rate i have.
Any guidelines of how to adjust the caltracs?
Car hooks without transbrake but not with.
Shocks are Koni spa that are set on the stiffest setting.
Had them looser and when on stiffest car started bouncing a couple of times from the start.
I have about 5" of front susp travel lifts really nice.

Any help would be appriciated.

Have videos but cant post them. (45 mb)
If someone could help with the videos i guess it would be easier for you guys to help me out.

I'm not understanding what bolt your talking about. As far a setting both bars left and right level with the ground, the drivers side has no slack, the passenger side is pre loaded two flats, now with footbraking the shocks are set on 7, with the brake I set it at 4.. You may have to play around with tire pressure also.

these ones

Call me a coward but there is no way I would take those clamps off mine. Jim

been running without them ever since i got her running.

Quote:

---

Call me a coward but there is no way I would take those clamps off mine. Jim

---

guess no one runs without them then.