Posted By: Quicktree
Hood pins on - 07/25/09 11:44 PM
somebody the other day wanted pics of hood pins. after a month of waiting they finally came in. these are 3/8s
Quote:
cause dzeus fastners suck, especially with a large scoop. I don't want to be an Eddie and watch the hood blow off at 100mph+. actually been there done that
Quote:
I guess ya got a box of spare pins in your trailer now, what color yellow is that ? is it stock mopar?
Quote:I think it looks pretty good.Quote:
I guess ya got a box of spare pins in your trailer now, what color yellow is that ? is it stock mopar?
yea it's a factory color. I think it's called blaze yellow. not really in love with it but it will do. it's just an old bracket car.
Quote:
looks good tony will it be ready by Saturday thinking of going to G-ville to play.
Quote:
Are you ever gonna get that thing to the track, your not getting any younger!!lol
Quote:Quote:
looks good tony will it be ready by Saturday thinking of going to G-ville to play.
I doubt it but I'll come out and give you a hand if you want.
Quote:
<----Runs two pins , with steel hood stock latch
Doesn't trust it
Quote:
cause dzeus fastners suck, especially with a large scoop. I don't want to be an Eddie and watch the hood blow off at 100mph+. actually been there done that
Quote:Quote:
cause dzeus fastners suck, especially with a large scoop. I don't want to be an Eddie and watch the hood blow off at 100mph+. actually been there done that
Get yourself some lanyards- like A-12- so you can keep them with the hood when you lift it off. Lots of pins to keep track of...
Quote:Quote:
Why the pin and not zues fasteners
For me I like them as I fear having to pull off a hood in an emergency like a fire with the Dzus
Quote:Quote:Quote:
Why the pin and not zues fasteners
For me I like them as I fear having to pull off a hood in an emergency like a fire with the Dzus
I use to worry about that but I keep a dzus tool
in my race pants pocket and another velco'd in the
car and the dzus fasteners have WAY less air drag,
besides looking better than those trees growing out
of the hood...... JMO
Quote:
I don't know,DT seems to run pretty fast with all the air drag. he uses the same pins on his cuda.
Quote:Quote:
I don't know,DT seems to run pretty fast with all the air drag. he uses the same pins on his cuda.
Sure dont see them on prostocks.... I know you guys
like them because they were put on some of the Mopars
so thats fine.... and yes they do work.... again...
it each his own(and its your car)
Quote:Quote:Quote:Quote:
I don't know,DT seems to run pretty fast with all the air drag. he uses the same pins on his cuda.
Sure dont see them on prostocks.... I know you guys
like them because they were put on some of the Mopars
so thats fine.... and yes they do work.... again...
it each his own(and its your car)
that has nothing to do with it as far as I am concerned. I like them because they are easy and quick to remove. and you don't have to worry about them popping loose and the hood blowing off. thats it. I wont run fast enough to worry about anything else
If the scoop was mounted to the engine like this, you wouldn't worry about the hood blowing off, or bulging down track.
Quote:
quik where did you get that hood pin setup.....
Quote:
can you post a pic of your hood off of how your brackets are underneath... thanks