Dominator throttle cable mounts

Dominator throttle cable mounts - 06/27/09 11:02 PM

I was considering just running a solid link from my pedal to the carb via rod ends and linkage. What are you guys running with a cable for a bracket to save me some time.
Gus

Posted By: T748

Re: Dominator throttle cable mounts - 06/27/09 11:19 PM

If your not running a drop base air cleaner,Summit or Jeg's sell some good looking ones. I had to make one to fit under the K&N drop base and mount an idle compensator. It's just 3/4" or 1" flat steel with the cable hold down from a stock bracket. -Tom.

Posted By: fourgearsavoy

Re: Dominator throttle cable mounts - 06/27/09 11:37 PM

Wow! an actual Team-G intake in use

I have one of these intakes that I cant sell to anyone.

I was going to use it but I got a great deal on a Mopar M-1 intake instead.I think I will just make a bracket like yours to use the factory cable just to save time and money

Gus

Posted By: 69CHARGERMD

Re: Dominator throttle cable mounts - 06/28/09 12:20 AM

I got a bracket,,,and a lokar cable,,,dont have any close up pics............
Previous set up with the stock cable and attachements,,,always seemed to move,,and was actually not opening the carb all the way....
I like the current setup,,,works great,,,no worries...

Posted By: AndyF

Re: Dominator throttle cable mounts - 06/28/09 12:59 AM

I make throttle brackets (and throttle returns) that work with Dominator carbs. Mancini should have them in stock or try Hughes, they also carry most of my stuff these days. My stuff is designed to work with stock throttle cables. There is also a tab on there for a Lokar kickdown but I've never seen anyone hook up a kickdown to a Dominator carb before. It is possible to do, just never seen it done.

Attached picture 5318925-Domreturn.jpg

Posted By: therocks

Re: Dominator throttle cable mounts - 06/28/09 01:18 AM

I have the Mancin bracket on my 440 with M1 and Dominator.I used a /6 cable and modified the pedal end to fit the 65 setup.Works fine and its street driven.Rocky

Posted By: moparacer

Re: Dominator throttle cable mounts - 06/28/09 01:35 AM

I bought the Jegs cable mount and return spring bracket for mine. Similar to what 69 has in his pic.

With the 2 ft lokar cable it is sweet....

I will take a pic and post it.

was only like $59

Posted By: moparacer

Re: Dominator throttle cable mounts - 06/28/09 01:44 AM

I had to use 2 5/16 flat washers under the bracket to give the accelerator pump arm adequate clearance....

Attached picture 5318996-DSCF3035_opt.jpg

Posted By: moparacer

Re: Dominator throttle cable mounts - 06/28/09 01:46 AM

another

Attached picture 5319000-DSCF3037_opt.jpg

Posted By: Ari440

Re: Dominator throttle cable mounts - 06/28/09 03:40 AM

moroso return spring and csr throttle bracket

Posted By: Satanized_68

Re: Dominator throttle cable mounts - 06/28/09 05:07 AM

I have a Jeg's throttle bracket and I think it's a nice piece. Fits perfect under my 16" drop base K&N air cleaner.
I did have to put a small notch in the back (see pic) but that's no biggie, 5sec job max.

Posted By: T748

Re: Dominator throttle cable mounts - 06/28/09 06:03 AM

Quote:

Wow! an actual Team-G intake in use I have one of these intakes that I cant sell to anyone. I was going to use it but I got a great deal on a Mopar M-1 intake instead.I think I will just make a bracket like yours to use the factory cable just to save time and money
Gus

Thats funny, I've got an M1 4500 that nobody wants. One of these days I'll bring both to the track for a back to back test. My engine builder claimed the G made more power but I don't have any paper nor given numbers to prove it.

Andy F's throttle brackets are great deals. I had one with a victor/4150 combo and it was sweet! I would reccomend anything that comes from his shop.
-Tom.

Posted By: Rodney

Re: Dominator throttle cable mounts - 06/28/09 12:37 PM

I use a solid shaft and was told be a tech guy I needed to have a toe clip welded to the pedal Which I've forgot to do until right now

.
Also a solid throttle stop for the pedal to rest on @ WOT.

Posted By: fourgearsavoy

Re: Dominator throttle cable mounts - 06/28/09 02:58 PM

Quote:

Quote:

Wow! an actual Team-G intake in use I have one of these intakes that I cant sell to anyone. I was going to use it but I got a great deal on a Mopar M-1 intake instead.I think I will just make a bracket like yours to use the factory cable just to save time and money
Gus

Thats funny, I've got an M1 4500 that nobody wants. One of these days I'll bring both to the track for a back to back test. My engine builder claimed the G made more power but I don't have any paper nor given numbers to prove it.

Andy F's throttle brackets are great deals. I had one with a victor/4150 combo and it was sweet! I would reccomend anything that comes from his shop.
-Tom.

Yeah I think I will go with Andy's bracket to keep my original cable and be able to use my K&N air filter.
I had that Team-G at a swap meet before and the best offer I had was $60.00 so I took it back home.
Gus

Posted By: an8sec70cuda

Re: Dominator throttle cable mounts - 06/28/09 03:58 PM

Put the Team G on ebay if you want to sell it. I sold one a while back (dominator flange for RB), had several bids on it.

CHIP

Posted By: Joshs68

Re: Dominator throttle cable mounts - 06/28/09 09:56 PM

I use this on my charger with a $20.00 stock cable and it works great.

Quote:

I make throttle brackets (and throttle returns) that work with Dominator carbs. Mancini should have them in stock or try Hughes, they also carry most of my stuff these days. My stuff is designed to work with stock throttle cables. There is also a tab on there for a Lokar kickdown but I've never seen anyone hook up a kickdown to a Dominator carb before. It is possible to do, just never seen it done.