comp roller lifters?

Posted By: juicedcuda

comp roller lifters? - 06/13/09 08:35 PM

What are the correct Comp roller lifters for a bushed big block w/ pushrod oiling? I have a set of 829-16's and I remember member OU812 was offering another newer design, but I don't have the part #?

Posted By: boatracer572

Re: comp roller lifters? - 06/13/09 08:41 PM

I use the comp 892-c lifters (c=centerd)

Attached picture 5290524-_WI_0326.jpg

Posted By: hemi-itis

Re: comp roller lifters? - 06/13/09 09:49 PM

Quote:

What are the correct Comp roller lifters for a bushed big block w/ pushrod oiling? I have a set of 829-16's and I remember member OU812 was offering another newer design, but I don't have the part #?

How can you have p/rod oiling if the lifter bores are bushed??

Attached picture 5290614-117-1735_IMG.JPG

Posted By: juicedcuda

Re: comp roller lifters? - 06/13/09 10:57 PM

bushings drilled in lifter bores?

Posted By: juicedcuda

Re: comp roller lifters? - 06/13/09 11:05 PM

Quote:

Quote:

What are the correct Comp roller lifters for a bushed big block w/ pushrod oiling? I have a set of 829-16's and I remember member OU812 was offering another newer design, but I don't have the part #?

How can you have p/rod oiling if the lifter bores are bushed??

By chance, do you know the part # of the lifters pictured?

Posted By: hemi-itis

Re: comp roller lifters? - 06/13/09 11:16 PM

Those are comp 829's without EDM oiling.I now use the 848's in my hemi and Brian's wedge.Sent oil up the exhaust side only on the hemi and all 16 on the wedge.Oil pressure was 15lbs less with these lifters.

Posted By: dvw

Re: comp roller lifters? - 06/14/09 01:50 PM

Not to highjack but. What is the difference between Comp 892 and 829?
Doug

Posted By: boatracer572

Re: comp roller lifters? - 06/14/09 02:27 PM

the comp 892 lifter is a p.r. oiling lifter where a 829 is not!

Attached picture 5291658-_WI_0326.jpg

Posted By: Brian Hafliger

Re: comp roller lifters? - 06/14/09 03:32 PM

Quote:

What are the correct Comp roller lifters for a bushed big block w/ pushrod oiling? I have a set of 829-16's and I remember member OU812 was offering another newer design, but I don't have the part #?

I still offer them, the body design is a little different than what comp sells.
I have them in centered and offset.
Brian