Dana axle retainers

Posted By: DARTSPORT340

Dana axle retainers - 05/19/09 01:03 AM

My chassis car has 40 spline Mark Williams axles but when I got the car there were no retainers with it. Do I need to go directley to MW for these or can I order them somewhere else?

Posted By: savoyracer

Re: Dana axle retainers - 05/19/09 01:17 AM

My retainers came with my bearings[attached].......Strange axles..38 spline

Posted By: dc426

Re: Dana axle retainers - 05/19/09 01:34 AM

what brakes are on it? I had to remove the retainers to use my Aerospace brakes.
DC

Posted By: Cab_Burge

Re: Dana axle retainers - 05/19/09 02:29 AM

Quote:

My retainers came with my bearings[attached].......Strange axles..38 spline

Do you mean 35 spline axles? If not clue us in on the new parts availble

Posted By: DARTSPORT340

Re: Dana axle retainers - 05/19/09 03:36 AM

No brakes at the moment. I'm planning on using discs but I'm going to use a aftermarket bracket kit I found.

Posted By: bigtimeauto

Re: Dana axle retainers - 05/19/09 04:04 AM

The retainer is part of the brake caliper bracket.

Posted By: dc426

Re: Dana axle retainers - 05/19/09 08:57 AM

below is a picture of my Aerospace rear brake caliper bracket that doubles as a bearing retainer. Your car must have had something similar and was removed.

Posted By: savoyracer

Re: Dana axle retainers - 05/19/09 02:43 PM

Quote:

Quote:

My retainers came with my bearings[attached].......Strange axles..38 spline

Do you mean 35 spline axles? If not clue us in on the new parts availble

OOPS, My Bad, you are correct. 35 splines