anyone use MSD 7530?

I would like to learn more about pulling timing out in gear changes. I need some advice.
Thanks

I have one but it's still in the box. I'll be watching this one

Is there a site you can go to that tells you how to do this kind of thing?

msdignition.com has all the instructions.

I just looked at that. I would rather talk to someone that has done this.

some of the F.A.S.T. guys mess with them a lot.

I've used them, and now use the digital control box to drive my 10 box with all the same functions and on the same program.

They add a ton of tuning options, and for a nitrous guy, or forced you can't beat it. I'm N/A now so about the only thing I use anymore is the start retard, mag comp, and individual cylinder timing, and high gear retard. The runcurve is a good thing too and easy to use.

Quote:

---

I've used them, and now use the digital control box to drive my 10 box with all the same functions and on the same program.

They add a ton of tuning options, and for a nitrous guy, or forced you can't beat it. I'm N/A now so about the only thing I use anymore is the start retard, mag comp, and individual cylinder timing, and high gear retard. The runcurve is a good thing too and easy to use.

---

I have one (7530T) and it has been giving me fits. I am going to call a tech tomorrow and send them my .ign file and see if they can see what is going on. I just want to start with the basics and then add to it with some high gear retard and possibly some individual cylinder timing.