Water manifold

Looking to change from a csr pump to a inline Stewart on a 572 indy block who makes a manifold for the upper and lower hoses and the temp sender for drag use only thanks for a help

Mine are plumbed directly into the water pump outlets on the block. I use the Meziere block adapters for mine. My temp sensor is in the radiator. FWIW I use a Meziere radiator mounted pump. Can take other pics if you like. FWIW Wilson sells water manifolds. They are not cheap and you will still need the block adapters. Also I believe AndyF also sells block adapters.

Not easy to see but they are in there

I used to make block adapters but I sold the design to Indy. Call them and see if they have some in stock. Last I knew they were still selling them.

An older thread on the same subject

https://board.moparts.org/ubbthread...6985/re-big-block-remote-water-pump.html