Moparts
904 Yoke that will hold up
Posted By:
bigdad
904 Yoke that will hold up -
01/14/23
10:35 PM
Is there another option out there good quality for less $$$ than this one ?
https:/
/
www.manciniracing.com/
mrefoa9slyo.html
Posted By:
crackedback
Re: 904 Yoke that will hold up -
01/14/23
11:22 PM
Looks like a Williams yoke 39031. They are 235 on the MW site.
https:/
/
www.jegs.com/
i/
Inland-Empire/
537/
SY-904-1350Q/
10002/
-1
https:/
/
www.doctordiff.com/
1350-transmission-slip-yoke.html
Posted By:
RTSE4ME
Re: 904 Yoke that will hold up -
01/14/23
11:30 PM
When I was looking I ended up with MW . .... lot more $$$.
Posted By:
RTSE4ME
Re: 904 Yoke that will hold up -
01/14/23
11:37 PM
Originally Posted by crackedback
Looks like a Williams yoke 39031. They are 235 on the MW site.
surprised they are still 235
Posted By:
J_BODY
Re: 904 Yoke that will hold up -
01/15/23
12:27 AM
https:/
/
www.iedls.com/
Online_Store/
2/
7
Posted By:
CMcAllister
Re: 904 Yoke that will hold up -
01/15/23
01:57 AM
Mark Williams and Mancini looks like the same part.
What are you using that's not holding up? Breaking? 7260 joint?
Posted By:
scottb
Re: 904 Yoke that will hold up -
01/15/23
03:12 AM
I have the Empire yoke on my 904 1350 joint works great I ran my old car with a stock 7260 joint going 1.28 60 ft and thf joint never broke
Posted By:
racerx
Re: 904 Yoke that will hold up -
01/15/23
03:48 AM
Hate to hear the subject on u-joints, I've been running these 7290's solid for 30 years without issues @3350 lbs. upgrading to twin turbos i guess we shall see.
Posted By:
Bad340fish
Re: 904 Yoke that will hold up -
01/15/23
11:17 AM
I have the Inland Empire 1350 one as well, no complaints.
Posted By:
1965fish
Re: 904 Yoke that will hold up -
01/15/23
10:36 PM
I run Mark Williams.
https:/
/
www.amazon.com/
gp/
product/
B00CFG9WPQ/
ref=ox_sc_saved_title_1?smid=ATVPDKIKX0DER&psc=1
Posted By:
Cab_Burge
Re: 904 Yoke that will hold up -
01/16/23
04:00 AM
They all look alike; I wonder if they are
Posted By:
bigdad
Re: 904 Yoke that will hold up -
01/16/23
01:18 PM
Just wanting to buy the right one the 1st time ..
this one looks the same but, is it forged or cast ?
https:/
/
www.doctordiff.com/
1350-transmission-slip-yoke.html
Posted By:
rickraw
Re: 904 Yoke that will hold up -
01/16/23
09:21 PM
Says it’s chrome moly
Posted By:
bigdad
Re: 904 Yoke that will hold up -
01/16/23
09:38 PM
Isee tht now, I emailed drdiff
Posted By:
bigdad
Re: 904 Yoke that will hold up -
01/16/23
10:53 PM
SHIPPING .. $63.50 ..wow
Posted By:
bigdad
Re: 904 Yoke that will hold up -
01/16/23
10:57 PM
They had it on ebay .. 105 shipping free ..
Posted By:
mopar65
Re: 904 Yoke that will hold up -
01/24/23
06:05 PM
It was spendy when I bought it a few years ago so not sure what it cost now. But I bought a Mark Williams 1350 joint yolk for my 904
© 2024
Moparts Forums