spark plug tubes stage v cover

Can anyone tell me what tubes and hardware i need for the stage v valve cover?

Try Tim at FHO 905-797-2459 or Stage V at 909-595-8383

Same as stock

I thought the stage V cover was taller than stock cover?

I will not be contacting Tim for anything for this point. I may give stage v a call, but i had trouble getting them to answer the phone in the past.

I don't think Stage V sells plug tubes and o-rings.

By the way Stage V valve covers take STOCK o-rings. NOTICE I SAID STOCK IN CAPS. This means stock. Not this garbage that Mopar has been selling us for 30 years. The only place I've found those in the last 20 years has been John Arruzza. Is he back?

You said hardware. If it's studs you're looking for, those are ARP 245-7601 for KB valve covers.

Kinda sorta. But the depth of the recess for the plug tube is .200" deeper. What this means is that the stock tubes work but they won't have that lip sticking up over the top of the valve cover to align the stock street hemi plug covers.

I should say the Stage V valve covers are taller/wider down lower where it matters with some rockers. Ray Barton rockers and some others don't fit under stock valve covers but they will under KB, Stage V and Ansen.

https://www.facebook.com/rickshemis/ If Rick is still into things he will take care of you. Good guy IMO, had really good luck with him years ago.

Hey thanks guys. I found a set of OEM 426 tubes used.