Posted By: maximum entropy
whadaya guys think it'll make? - 04/16/09 08:23 PM
500 stroker, .060 over 440, 4.15 stroke, cnc stealth heads, 12.18:1 cr, victor 440 intake, proform 950 carb, mp p4349268 cam (the .620 cam), 1.5 rockers. just curious. i ain't got no desk top dyno or nothin'. the cam looks to be a pretty fair match for these heads and cr. thoughts? comments? fustigation?
Posted By: smokinwoody
Re: whadaya guys think it'll make? - 04/16/09 09:19 PM
did you have the heads flowed??
Posted By: maximum entropy
Re: whadaya guys think it'll make? - 04/16/09 09:39 PM
they were ported by modern. i think they flow ~320 @ 600 lift? good midlift numbers, too, if'n i recall.intake
75@.1,
156@.2,
219@.3,
266@.4,
298@.5,
306@.550,
314@.6,
320@.650. exhaust with 2" tube
73@.1,
124@.2,
166@.3,
198@.4,
219@.5,
228@.550,
233@.6,
238@.650.
Posted By: gsmopar
Re: whadaya guys think it'll make? - 04/17/09 01:12 AM
I must have entered in something wrong??? Desk Top Dyno says
889@6500 
Posted By: gsmopar
Re: whadaya guys think it'll make? - 04/17/09 01:20 AM
Oops! That was with a big shot of nitrous. Here you go:
672@6500 
Posted By: 67cuda340
Re: whadaya guys think it'll make? - 04/17/09 01:50 AM
It should make it down the track...
See ya there, saturday?
Posted By: maximum entropy
Re: whadaya guys think it'll make? - 04/17/09 02:57 PM
gsmopar-thanks! that's what i was hoping for. matt- oh yeah! i'll be there saturday. car is packed and ready to go. cab- i'd like to dyno it. we'll see if it's in the budget. it'll be 4-6 weeks before i'm done with it. see you guys saturday! thanks again, everybody.
My guess on a good dyno it will make 675 to 700 HP and 650 to 680 ft. lbs on torque, even with that old school Mopar cam 
Maybe I can loan you a 1000HP 4150 to try to compare the 950 agianst 
Let me know if so