Posted By: Hutch
Looking for a Cometic C5460-040 - 07/11/22 05:53 PM
If anyone knows where some may be hiding , the help would be much appreciated.
Hutch
Posted By: Bad340fish
Re: Looking for a Cometic C5460-040 - 07/11/22 07:05 PM
I googled it and Autozone said they could deliver to my home by the 14th. Might be worth a shot ya never know.
Posted By: JERICOGTX
Re: Looking for a Cometic C5460-040 - 07/11/22 07:11 PM
Have you called Todd at Marsh Performance?
Posted By: Hutch
Re: Looking for a Cometic C5460-040 - 07/11/22 07:20 PM
Ya , I have pretty much exhausted anything online. Everybody can get it but in reality they can't.
Hutch
Posted By: Hutch
Re: Looking for a Cometic C5460-040 - 07/11/22 07:32 PM
Have you called Todd at Marsh Performance?
Called them as per your request. Great bunch of guys and very helpful. Although they did not have that exact gasket he was good enough to offer an alternative that im considering.
Hutch
Posted By: blowndart
Re: Looking for a Cometic C5460-040 - 07/12/22 10:21 AM
I ordered some Cometics at the beginning of the year from a company that said that they had them in stock. It took six months to get them. Needless to say, they did not have them in stock. Hopefully what Todd Marsh has, will work for you.
Posted By: Jeremiah
Re: Looking for a Cometic C5460-040 - 07/12/22 11:56 AM
Trick Flow Specialties TFS-61694350-040 - Trick Flow® by Cometic MLS Head Gaskets
https://www.summitracing.com/parts/tfs-61694350-040/make/chrysler6 in stock, act now!
Posted By: Jeremiah
Re: Looking for a Cometic C5460-040 - 07/13/22 05:16 AM
I ordered 4.350", 4.375", 4.380 " and 4.410" in .040 and .051 back in March if anyone gets in a jamb.
Posted By: Al_Alguire
Re: Looking for a Cometic C5460-040 - 07/13/22 04:56 PM
Have two engines waiting on Cometic right now. Been a few months and counting.
Posted By: Jeremiah
Re: Looking for a Cometic C5460-040 - 07/13/22 05:29 PM
What platform are the engines? I assume bigger bore stuff (4.500ish)?
Posted By: Al_Alguire
Re: Looking for a Cometic C5460-040 - 07/13/22 05:36 PM
the number in question is NOT for a big bore. My stuff is, both engines are 4.560"