Moparts
Inake w5
Posted By:
RAY1969CARS
Inake w5 -
09/19/21
10:09 PM
Short deck 4in stroke12.1 4.180 bore 720 roller what intake do I use. Super victor or Mopar w2
Posted By:
RAY1969CARS
Re: Inake w5 -
09/19/21
10:22 PM
.
Posted By:
Brian Hafliger
Re: Inake w5 -
09/20/21
02:35 AM
Originally Posted by RAY1969CARS
.
Why the SB Mopar makes such good power!
Posted By:
B3422W5
Re: Inake w5 -
09/20/21
01:01 PM
Didnt Brett Miller tell you what you needed?
Posted By:
gzig5
Re: Inake w5 -
09/20/21
02:07 PM
That Super Victor looks like a single carb tunnel ram compared to the W2. I think I'd try that first.
Posted By:
B3422W5
Re: Inake w5 -
09/20/21
02:21 PM
Originally Posted by gzig5
That Super Victor looks like a single carb tunnel ram compared to the W2. I think I'd try that first.
Not sure if it will bolt up to a 9 inch deck deal
Posted By:
RAY1969CARS
Re: Inake w5 -
09/20/21
02:28 PM
The W2 is a factory low deck intake
Posted By:
RAY1969CARS
Re: Inake w5 -
09/20/21
02:34 PM
Originally Posted by B3422W5
Didnt Brett Miller tell you what you needed?
I could be wrong but this is the intake that he wanted me to use it looks a little big for what I’m gonna be doing It’s the one on the top of the picture I don’t believe the W phase will make any more power past 750 /775 hp
Posted By:
340Cuda
Re: Inake w5 -
09/20/21
02:48 PM
I am kind of confused, aren't the two manifolds shown above for W8/W9 heads?
Is the Super Victor for a oval port W2 or a rectangular port W5?
Providing the Mopar and the Edelbrock manifold both fit, I would try them both.
© 2024
Moparts Forums