With CRT not building Transmission's, Who do you guys Recommend? Looking for B.B. 727 reverse valve body with a brake! Will need it shipped to Washington State> Thanks Matt
Posted By: wyoming
Re: 727 Trans question - 09/04/21 02:26 AM
A&A trans, Rick Allison, Pro Trans, now in Texas, Coan, or your local trans guru
Posted By: Cab_Burge
Re: 727 Trans question - 09/04/21 02:34 AM
A1 trans in Vancouver, WA is good,360-574-1960
Posted By: racerx
Re: 727 Trans question - 09/04/21 12:09 PM
What's the reasoning CRT not building transmission anymore they still in business?
Posted By: lancer493
Re: 727 Trans question - 09/04/21 12:31 PM
Cope is still in business. Just received a drum and valvebody from them. I think they are short staffed, maybe why if they are not building at this time. Nice folks to deal with though. Bill
Posted By: racerx
Re: 727 Trans question - 09/04/21 01:56 PM
Thaxs....i have dealt with them in the past
thought they were out of the business .
Posted By: crackedback
Re: 727 Trans question - 09/04/21 04:46 PM
If you can build an engine you can do a 727... in house build is what I would do.
Posted By: A727Tflite
Re: 727 Trans question - 09/04/21 05:34 PM
If you can build an engine you can do a 727... in house build is what I would do.
Yep, so easy a Caveman can do it.
Posted By: slantzilla
Re: 727 Trans question - 09/07/21 09:58 PM
727specialists in Highland, IN
Posted By: J_BODY
Re: 727 Trans question - 09/08/21 10:39 PM
If you can build an engine you can do a 727... in house build is what I would do.
Yep, so easy a Caveman can do it.
Until I wasn’t happy with the shift timing then it was Pro-Trans to the rescue
Torqueflight is a very forgiving trans to build though….
Posted By: J_BODY
Re: 727 Trans question - 09/08/21 10:42 PM
A1 trans in Vancouver, WA is good,360-574-1960
….and in the OP’s local. Win/win!
….and put a billet front drum in it!