Moparts
LM2 replacement sensor?
Posted By:
justinp61
LM2 replacement sensor? -
07/18/21
12:42 PM
The O2 sensor for my LM2 has given up the ghost. What are y'all using for a replacement?
Thanks, Justin
Posted By:
YO7_A66
Re: LM2 replacement sensor? -
07/18/21
12:53 PM
I found this years ago and use it as a reference.
Posted By:
Twostick
Re: LM2 replacement sensor? -
07/18/21
01:56 PM
Originally Posted by YO7_A66
I found this years ago and use it as a reference.
They call for a 4.9 now. Compatible with the 4.2 except for the plug if I'm reading it correctly.
https:/
/
www.innovatemotorsports.com/
xcart/
bosch-lsu-4-9-o-sensor-p-n-3888.html
Kevin
Posted By:
moparacer
Re: LM2 replacement sensor? -
07/21/21
05:10 PM
Originally Posted by Twostick
Originally Posted by YO7_A66
I found this years ago and use it as a reference.
They call for a 4.9 now. Compatible with the 4.2 except for the plug if I'm reading it correctly.
https:/
/
www.innovatemotorsports.com/
xcart/
bosch-lsu-4-9-o-sensor-p-n-3888.html
Kevin
If you switch to the 4.9 don't forget to change it in the setup.
Posted By:
justinp61
Re: LM2 replacement sensor? -
07/21/21
05:48 PM
What's the advantage of the 4.9 sensor?
Posted By:
moparacer
Re: LM2 replacement sensor? -
07/21/21
08:08 PM
Originally Posted by justinp61
What's the advantage of the 4.9 sensor?
To make a long story short, it's better....
https:/
/
www.ecotrons.com/
accurate_lambda_meter/
bosch_lsu_49_is_superior_to_lsu_42_sensors/
Uses current instead of air, for reference. Much past that I am lost....
Posted By:
Twostick
Re: LM2 replacement sensor? -
07/21/21
08:29 PM
Originally Posted by moparacer
Originally Posted by justinp61
What's the advantage of the 4.9 sensor?
To make a long story short, it's better....
https:/
/
www.ecotrons.com/
accurate_lambda_meter/
bosch_lsu_49_is_superior_to_lsu_42_sensors/
Uses current instead of air, for reference. Much past that I am lost....
Does that eliminate the free air calibration?
Kevin
Posted By:
moparacer
Re: LM2 replacement sensor? -
07/22/21
12:06 AM
Originally Posted by Twostick
Does that eliminate the free air calibration?
Kevin
It seemed to on mine. Been using it all summer on Methanol and its 20.9 when I first start it up.
© 2024
Moparts Forums