resealing a BG 280 fuel pump

Has anybody replaced the seals in a 280 BG pump. The kits available. Looks like its leaking from the shaft seal. I took it apart and cleaned it and lubed the shaft. Still leaks. I have to wait a week for the parts. Monster Mopar is getting closer.
Doug

Had to reseal every BG pump that I owned at one time or another.

This guy has always gotten my stuff to me pretty quick

He has different kits so look around

Amazon is advertising it as the same kit as the bg400. If you were closer I have a couple kits. I always order extras to take to the track incase I would have to do a quick rebuild

.

That's the kit I ordered. Got the distributor rebuilt and the supercharger bolted back on. Carbs, fan and little wiring tomorrow. Getting close to getting it back out. It's amazing how well its all cleaned up after setting for 10 years.
Doug

You can get just the seal. There is a NOK number on it. I used to get them from my local bearing and seal supplier for like 2 or 3 bucks a seal. Most all the time the o-rings are still good.