Lunati Rollers to Isky or Crower

My Lunatis seemed a little loud to me .
Pulled apart for inspection
Anyone swap from a $450 dollar lifter to an $850 dollar
lifter and note pushrod difference ? Still gonna check
But .. want to see what this project will end up costing.

Thanks !

Whats your lash set at... try taking about .005 out of it

I don't think lifter price has anything to do with pushrod length !

No but it would make my day if they were within a thousandth . Lol
Im sure ill need pushrods .
Also - just curious also if anyone has experienced the crowers .
Lot of innernet complaints of morells & Lunatis .

I increasd and decreased.
Hot . Cold .
Not a big deal , but might want to try ..

What is your lash

Nicest i have used are Crane Ultra pro’s

Lunati Roller lifters are made by Merell.

I think you'll find that Lunati, Crower and Isky all have different seat heights.

Fyi pushrod lengths were perfect as was ..
no changes were necessary
Both landed on stems exactly in same spot!

Buy a lifter with the same pushrod cup ht and you will be fine no changing pushrods.Look up tjis info about your current lifter.Lifter tech

I’d be curious your thoughts after you get a few passes on them if they seem more consistent and quieter.

What brand did you buy and use?

yes inquiring minds need to know!!!!

Oops
This thread flew right by me .

. New Howards lifters are definitely quieter !
Switched back to 10/30 oil

They are Nice !

Thanks for letting us know the Crower and Lunati have the same lifter seat height.
Can you measure your old ones and tell us what the actual numbers are? Body height, seat depth, etc.

My notes say, Crower 66233-16 or with H seat height 1.34”, 122g, 0.812” bearing. With pushrod oiling. But I don't know how they define "seat height"
The Comp lifters seem to define it as put a 5/16 ball in the seat and measure from the top of the ball to the bottom of the lifter.

Are the Howards the same lifter seat height as the Crower and Lunati?