crank register adapter

a friend has an fuel crank he want's to use , it has no converter register, they use to make a adapter sleeve you could pound in there . anyone have one or know where to get one, I read an old thread where keith black used to sell them , all they have now is a web site with tee shirts and hats, I tried ATI and such but all they have is adapter sleeves for chev trans etc. thanks.

Call Tim at FHO and maybe Ray Barton
I need another two now also, please let us know who and where you find them.
I had one of the old KB adapters left but I can't find it now

I have a Keith black 4.25 crank with the same problem

Call Meziere they made me an adapter and flex plate

No one around here could do the register ring for me

Talk to Jerry tell him Ari sent you

He help me alot

1-516-279-0493 if you want to talk Ari

thanks for the replys

I’m gonna try to do mine on the lathe, I cut one off an old beat up crank.

pretty easy to make in a lathe... been there done that

We have one Russ. We ran it with our first combo which had a fueler crank with no converter provision. You must run a 3/8” spacer or mid plate. It works fine. Standard converter. If you can use it let us know

What dimensions and tolerance did you use?

ya my friend has a lathe, he said he'd try and make one .

[quote=440Jim][quote=boatracer572]
.0015 press fit in the crank, same tolerance as oem crank on the register to the flywheel, used a piece of 4340