Indy Rockers

Posted By: bigblockrik

Indy Rockers - 12/22/20 11:35 AM

I have a set of the black Indy roller rockers I bought back in 99 now finally getting around to finishing the project.Question is I have a solid roller around 240 seat pressure will they live or is it time to upgrade before I have a problem.Thanks

Posted By: bonefish

Re: Indy Rockers - 12/22/20 11:48 AM

mine knocked a few of the adjusters out with similar presser.replaced them with (i think crane golds)worked great.

Posted By: TonyS451

Re: Indy Rockers - 12/22/20 03:30 PM

I asked similar question recently. Im in the same boat...

https://board.moparts.org/ubbthreads/ubbthreads.php/topics/2857849/indy-rockers.html#Post2857849

Posted By: Chief

Re: Indy Rockers - 12/22/20 04:01 PM

I have a set also, ran them with seat pressures from 250 to 350. No issues other than I had a couple of pushrods get away from them and beat them up a little.
Went with Harlan Sharp as an upgrade after 15 + years..

Dave