Posted By: drifter
Guys that have used Fred Brewer Heads - 10/02/20 11:29 PM
The early version of his heads had rocker stands just like a factory iron bb head for that type of brewer head what rockers arms must be used on? I thought it was the Indy 440-1 style then I read somewhere they thought a small block rocker?
Posted By: Uberpube
Re: Guys that have used Fred Brewer Heads - 10/03/20 01:08 AM
What were the specs of those heads? Read about them, never seen a set, or even a pic.
Posted By: drifter
Re: Guys that have used Fred Brewer Heads - 10/03/20 01:42 AM
Here is a pic of the style I am talking about they look like 440-1 style but I’m not sure
Posted By: sasquatch
Re: Guys that have used Fred Brewer Heads - 10/03/20 06:55 AM
Those sure look like BB 1.5 ratio Indy rockers. The intakes are .850 offset and the exhaust is just standard. They have the offset exhaust like a BB. Those were made by Dove engineering for Indy but they no longer make them. Harland Sharp, T/D and Jesel still make them in several ratios. Really might have to play with the spacers to get perfect alignment on the valve tip.
Todd