Posted By: 1DGEMAN
CAM ID - 09/02/20 02:41 AM
Found a Mopar Performance cam #P4529188 no specs anybody know what it is? Anybody have a MP performance parts book late 80's early 90's
Posted By: ZIPPY
Re: CAM ID - 09/02/20 06:55 PM
4589 = not that I remember/doesn't seem to compute.
4529 = maybe.
But....Struck out.
The 1989 catalog skips from P4529180 to P4529200.
(I also checked a couple engineering cheat sheets, and no luck with either p4589 or p4529)
That's not to say the number never existed. Just that it was never cataloged that I can find.
It wouldn't hurt to try 1990 and 1991 but I don't have them.
My next oldest one is 1998, and all I could find was P4529187 which is an oil filter/no help.
Neither '89 or '98 have P4589 so I just have to assume it's supposed to be P4529, but you can never tell.
I'm at the end of my rope....sorry.
Could be a development part that never was sold to the public. There are a lot of things like that out there.
Posted By: 1DGEMAN
Re: CAM ID - 09/02/20 11:52 PM
It is a billet roller but none of the paperwork in the box match the number on the box and no cam card just a generic sheet with lots of cam numbers and specs but not this one. Shipping label on box says 1992 Thanks for your efforts
Posted By: ZIPPY
Re: CAM ID - 09/03/20 04:06 PM
Yeah it really could have been in and then right back out of the catalog.
Maybe somebody has a 1991 or 1992 book to check. My collection skips those years.
Good luck in your quest.