Aluminum water pump housing for BB

It’s been awhile since I bought one of these and noticed they have gone up. The 440 source is much cheaper than Mancini or summit. Is there’s ok? I heard the pumps may not be that great.

I've had a 440 source pump and housing on my one car since 2008 and haven't had an issue. I bought the passenger side outlet for my other car about 3 years ago and no issues with it. I'd buy another one.

I've run the Source pump and housing for 5700 miles and hundreds of dragstrip passes. No issues at all.

On eBay for $53 shipped to your door.

https://www.ebay.com/itm/fits-Chrysler-Mopar-BB-360-383-440-High-Volume-Aluminum-Water-Pump-Housing-Ony/291748195503?epid=14004118719&hash=item43ed8c2caf:g:wysAAOSwK~RaAk8L

I first bought the source housing with the passenger side inlet, made finding a radiator harder. Then bought their standard configure housing. Works fine and would buy again.

Thanks guys.

I have had some friends that were unlucky with the 440 Source pump that started to leak after a year or 2 ! I prefer the mp or milodon hv pump and you should look at the clearance so the inpeller dont hit the housing before install but 440 source housings should be fine to use