Posted By: AndyF
Mopar EFI article in Hot Rod - 01/15/19 07:09 AM
https://www.hotrod.com/articles/adding-h...ig-block-mopar/Coil near plug with port injection on my 514 inch big block. The long block was sold earlier this year but I still have some of the EFI parts sitting on the shelf. That was a good engine, it made a lot of power for a lot of dyno pulls.
Posted By: moparx
Re: Mopar EFI article in Hot Rod - 01/15/19 05:37 PM
i always enjoy your hot rod and car craft articles andy !
thanks for doing them !
Posted By: ZIPPY
Re: Mopar EFI article in Hot Rod - 01/15/19 06:41 PM
Nice work. There is really alot going on in every picture.
Posted By: Mopar_Rich
Re: Mopar EFI article in Hot Rod - 01/15/19 09:05 PM
Thanks for the reference in the article.
Posted By: AndyF
Re: Mopar EFI article in Hot Rod - 01/15/19 10:18 PM
Nice work. There is really alot going on in every picture.
Yeah there is a ton of custom fabrication involved but most people won't notice it since they don't know any better. Anyone who has tried to build this stuff will see it though. In a couple of pictures almost everything in the frame is custom fabbed.
Not sure if I'll ever do another project quite as involved as that one.
Posted By: Jerry
Re: Mopar EFI article in Hot Rod - 01/16/19 03:36 PM
we make a lot of these parts off the shelf now. save yourself the headache of custom fabbing everything. we will be releasing coil brackets that bolt on over the valve covers here soon, for both big blocks and small blocks.
our cam sensor bushings and mopar crank trigger kits are always popular with 36-1 trigger options and 24x trigger wheel options. and they can bolt onto a stock pulley without moving all the accessories.
Posted By: 72Challenger
Re: Mopar EFI article in Hot Rod - 01/16/19 05:28 PM
Jerry, migth want to change the webaddress in your sig by adding a - to it...
Posted By: Stuntman Bill
Re: Mopar EFI article in Hot Rod - 01/23/19 01:09 AM
Jerry, migth want to change the webaddress in your sig by adding a - to it...
Yes, the URL in your sig is not resolving correctly. Tried it last night, tried it again just now: "sd-concepts" works but "sdconcepts" resolves to a blank page.
Posted By: Jeremiah
Re: Mopar EFI article in Hot Rod - 01/23/19 03:35 AM
Andy,
Thank you for laying all of this out. I'm going to follow your EFI build lock step with an EFI Live dash and Dominator ECU.
It will take years off of my project compared to if we had to figure it out in house.
If you have any low deck stuff I'd be interested in a list.
I'm surprised you didn't reuse the injection system for a future build. Any insight on what the next test mule will be?
Posted By: Mopar_Rich
Re: Mopar EFI article in Hot Rod - 01/23/19 04:29 AM
Jeremiah:
I can provide you with everything you need including the AR CNP parts which I stock.
Posted By: AndyF
Re: Mopar EFI article in Hot Rod - 01/23/19 07:19 AM
I have a complete low deck EFI setup that is going into my Duster. The RB intake with injectors, fuel lines and throttle body is just sitting on the shelf for now. I'm planning on selling all of that stuff but haven't gotten around to posting an ad yet. As Rich said, the sensors, cam sync, trigger wheel setup, etc. are all available from him.