Where to search for discontinued MP parts?

Is there a way to see if Mopar Performance still has discontinued parts in there warehouse? I am specifically looking for:
P5249619 Intake spacers for W5 heads
As far as I can tell it looks like they are either backordered or discontinued.

Thanks!

they are NS1... no longer made. None in warehouse or dealer inventory. That said, they’re not that hard to make.

Search that number on E-Bay. You may get lucky and find some.

Just by the felpro intake gasket with the thick cork end pieces and use them with right stuff it works fine

I agree with both above. I'd buy the end gaskets and use them as a template and make a set. They were aluminum so they are easy to make. Quite frankly, I'm not so sure they couldn't be made out of UHMW or a similar products if you really wanted to.

Thanks guys. Once I know the thickness, I could fab them up as well.

I have a set in stock if you want to send me a pm I can get them right out. LAST set.
Todd

parts voice https://www.partsvoice.com/

I gave up. These can be machined out of bar stock.

Another route I will try later is ordering the end parts them selves as a seperate part from the Edelbrock Victor head set package.

in working with Edelbrock and Summit racing, (1-330-630-0240) I will have to order 1 peice of raw material #44-61701 & # 44-61702 from the finished part number of 61739.

Good luck, I just haven't gotten around to it yet.