Posted By: 5280Dart
Looking for automotive machine shop washington state/PNW - 09/30/18 10:59 PM
A friend needs a good shop. Looking for automotive machine shop washington state/PNW.anyone have a reliablessed favorite?
Posted By: AndyF
Re: Looking for automotive machine shop washington state/PNW - 10/01/18 12:49 AM
Are you in the tri-city area? I use Gray's Automotive in McMinnville, OR but that is 3+ hours from the tri-cities. There are some boat racers up in the tri-cities who bring their engines down to Gray's so I guess they think the trip is worth it. I'm sure there are shops up there but I don't have any experience with them.
Posted By: JD Dart
Re: Looking for automotive machine shop washington state/PNW - 10/01/18 01:23 AM
I always take my stuff to Action Auto Machine shop.
17012 Aurora Ave N
Shoreline, WA 98133
206-546-2082
Posted By: hemienvy
Re: Looking for automotive machine shop washington state/PNW - 10/01/18 07:50 PM
X2 on Action Auto Machine.
Posted By: StealthWedge67
Re: Looking for automotive machine shop washington state/PNW - 10/02/18 02:18 AM
I had a good experience both from a customer service and quality standpoint a few years ago at Pacific Engine Rebuilders in Tacoma. They have a crank lathe and cut my RB crank to fit my B-Block and balanced it all up, along with all the machine work on my block. I mic’d everything before assembly, all was good; I’d use them again in a heartbeat.
My Buddy recently used Britco in Centrailia with Good success with his BBC.
Posted By: madscientist
Re: Looking for automotive machine shop washington state/PNW - 10/02/18 10:53 PM
Where exactly are you?
If you are near Vancouver Toms Performance Machine