chassis dyno's in washington state?

chassis dyno's in washington state? - 03/10/09 05:59 AM

Hey guy's, Does any of the Wa state members know of any good chassis dyno shops in westeren Washington? I'm up by the Everett/Oak Harbor area.Thanks Matt

Posted By: thecarfarmer

Re: chassis dyno's in washington state? - 03/10/09 06:02 AM

Does Maddy's in Shoreline still have a dyno?

-bill

Posted By: Polarapete

Re: chassis dyno's in washington state? - 03/10/09 06:20 AM

There is a place in the Kirkland - Totem Lake area called the Carburetor Connection.

http://www.carbconn.com/

My Polara has been on those rollers. Years ago we did a club "Dyno Day", all I can say is the truth hurts!!

Posted By: Stroker Scamp

Re: chassis dyno's in washington state? - 03/10/09 06:23 AM

hobart wa, pretty close to issaquah, horse power ranch, hpranch.com

Posted By: dthemi

Re: chassis dyno's in washington state? - 03/10/09 12:44 PM

Quote:

There is a place in the Kirkland - Totem Lake area called the Carburetor Connection.

http://www.carbconn.com/

My Polara has been on those rollers. Years ago we did a club "Dyno Day", all I can say is the truth hurts!!

I did some testing there, and they were nice, and professional, and have tons of carb parts if you need to change stuff.

Posted By: Classof70Chally

Re: chassis dyno's in washington state? - 03/10/09 04:37 PM

Try Blood Enterprises in Auburn. It's a bit of a drive but they build and tune race motors there and have a A/F ratio machine (not the right term) that they will hook up if you have an O2 bung on your exhaust. They will dial your carb(s) in right there on the dyno. They are not cheap but they are quick and good.

Posted By: Bruce

Re: chassis dyno's in washington state? - 03/10/09 06:20 PM

You could also try Horsepower connection in Lacy, wa.
http://www.horsepowerconnection.com/

They were on Pinks with the turbo 1979 Malibu.

Brian Macy has turned high 7's on radials with a single turbo. The seem to know what they are doing.

Bruce