Posted By: A/MP
CNC SB HEAD PROGRAMS - 06/20/18 04:40 AM
Anyone have some recommendations for shops that have a staged CNC program for Edelbrock 60779? Not sure how far the next 360 build will go so stages of the porting will help in that project.
Posted By: B3422W5
Re: CNC SB HEAD PROGRAMS - 06/20/18 05:02 AM
Modern has an excellent Eddie CNC program
Posted By: A/MP
Re: CNC SB HEAD PROGRAMS - 06/20/18 04:29 PM
Not to change the contents of this post but a friend just asked about a shop in Ohio that has a CNC program for iron heads. Had that info on my lap top until it crashed.
Posted By: scottb
Re: CNC SB HEAD PROGRAMS - 06/20/18 05:45 PM
Bob at Modern cylinder head had a very nice program just sent a set to bob yesterday
Posted By: Mopar Mitch
Re: CNC SB HEAD PROGRAMS - 06/25/18 09:10 PM
Did you check out Hughes Engines? They have a CNC machine dedicated to porting.. very good results.
Posted By: scottb
Re: CNC SB HEAD PROGRAMS - 06/25/18 10:53 PM
Don’t trust Hughes flow numbers
Posted By: Moparmatts72
Re: CNC SB HEAD PROGRAMS - 06/26/18 02:37 AM
Michael at B3racing doesn't have a cnc machine but he ports it to your application, great guy to talk to, and does awesome work. I have my edelbrock rpm magnum heads and super victor intake done by him.