Posted By: Anonymous
Cam recommendations - 03/08/09 12:23 AM
What roller cam would you guys recommend for a 500 ci with the following parts.Also how hard should a guy rev something like this.
Ported 440-1 heads
13.8 compression lighweight flattops
Rons flying toilet
6000 converter
3000 lb race weight
indy intake
Eagle crank and rods
Posted By: rebel
Re: Cam recommendations - 03/08/09 05:45 AM
the Eagle crank would be the part i would be concerned with but a cam at 280+@050 would be a shoe-in.
Posted By: DemonDust
Re: Cam recommendations - 03/08/09 07:37 AM
How about more specs. Bore, stroke, head flow, valve sizes.
Posted By: Anonymous
Re: Cam recommendations - 03/08/09 12:52 PM
Quote:
How about more specs. Bore, stroke, head flow, valve sizes.
Sorry but this is my neighbors hodge podge of parts.As for the bore it is a .030 over 440 block with a girdle.The heads hav,nt been on a flow bench,so i have no idea on what they flow.Valves are the originals that indy supplied with the heads.He has talked to several cam companies and they all recommend running something different and this has him confused.Myself i,ve never run alcohol so i have no idea what kind of centerline he needs or duration. He said they mentioned that he would need a cam with a centerline of 112 or greater to use with injection. 
Posted By: 540dust
Re: Cam recommendations - 03/08/09 01:40 PM
The best I can do, never ran a roller before.
