Posted By: Cuda_Mike
General Kinetics Hyd. Cam Specs - 05/19/18 02:39 AM
Stripped out a 400 today for sonic check, had a GK cam, A5H304-Z hydraulic cam, anyone know specs on it? Thanks for any info.
Posted By: lewtot184
Re: General Kinetics Hyd. Cam Specs - 05/20/18 05:24 PM
measure the lobe lift and then go over to the crane master lobe profile site and see if anything matches up to 304.
Posted By: Cuda_Mike
Re: General Kinetics Hyd. Cam Specs - 05/20/18 05:32 PM
Did the measurement, .332, before I posted, like to know more.
Posted By: lewtot184
Re: General Kinetics Hyd. Cam Specs - 05/20/18 06:31 PM
i found a 304/.336. 304 degrees at .004". crane Z lobes.