Posted By: moparmatt0
73 Cuda inexpensive headers - 05/09/18 12:49 PM
Who sells decent headers for a 73 cuda with a 440 4-speed and power steering I bought a set from jegs that hit the steering box and will not allow the motor to set on the mounts thanks for any help Matt.
Posted By: sgcuda
Re: 73 Cuda inexpensive headers - 05/09/18 12:53 PM
I've never had issues using Hooker Headers with my big blocks. But I never had power steering in my cars, either. The only time I had issues was using a Lakewood shield. The crown points on the housing seem to get in the way. Minor trimming fixes that. Clutch replacement with headers becomes a major feat.
Posted By: bigdad
Re: 73 Cuda inexpensive headers - 05/09/18 04:53 PM
inexpensive ? Not these
http://www.ttiexhaust.com/These fit well
https://shop.dougsheaders.com/not really cheap but, do cost less than TTI's
Posted By: BradH
Re: 73 Cuda inexpensive headers - 05/09/18 10:55 PM
My suggestion is to check for fitment instructions / restrictions for Hooker 5903 "Comp" series headers. They're not perfect, but I did run them w/ power steering and an auto w/o steering component clearance issues. The driver's side collector was really close to the torsion bar, though. They're about $300 for the uncoated version, and if you ordered a set thru Jeg's w/ their current promo code, they'd be about $270 w/ free shipping.
If you choose to go w/ Hookers, do NOT buy the ones with their cheap-a$$ ceramic coating. My experience w/ their in-house coating option was very disappointing...