What 2 use to unstall race glass/windshield. NE pic???

He guys, thought I would ask. I have a semi built drag cuda that I want to start finishing up. The glass is cut, has been for years but not installed. Its LEXAN I believe, I bought it a few years ago, its not older plexiglass or anything.

How do you guys install your glass. I need to do the front and rear glass. Do you use some metal trim to cover the edges and just screw it in. I want it to look nice a neat. Is it all fabed, or does anyone make any sort of kit for the cudas, like a metal trim over the edges.

Can I see a few pics of how you did your and get some advise.

thanks, Dave

Check this out web page

Thanks for the link on loosing some weight on the doors. I still am looking for ose direction on what yuou guys use to trim your race glass in the front and rear glass if anything an dhow you installed them?

Thanks, any pics vailable??
Dave

I riveted mine in, I used alum rivets to help avoid cracking the lexan. I did put some clear silicon in the frame before installing it to help seal out any water.

I used 1/4" X 3/4" weather strip (hardware store) and
black philips head screws to mount it. I also painted the
boarder black before mounting the lexan.

I painted the border black as well. IIRC it was about an inch all the way around.

This should help !

http://www.datinmanjay.com/windows1

SIKPUP