Moparts
B/E-Body with Front Coil Over Conversion....
Posted By:
STEFF
B/E-Body with Front Coil Over Conversion.... -
03/06/18
07:28 PM
What spring rate you running?
Posted By:
Cab_Burge
Re: B/E-Body with Front Coil Over Conversion.... -
03/06/18
07:35 PM
Originally Posted By STEFF
What spring rate you running?
Probably depends on which motor
I seem to remember seeing from 350 to 400 Lbs. on front coil over springs on some I've seen mentioned on here
Posted By:
6PKRTSE
Re: B/E-Body with Front Coil Over Conversion.... -
03/06/18
10:10 PM
Mine are 400 with a 2ND gen Hemi alum heads & intake. It isn't no lightweight even with aluminum heads & intake. Iron Mega block though. Car sits just right.
Posted By:
BigBlockGTS
Re: B/E-Body with Front Coil Over Conversion.... -
03/06/18
11:55 PM
Originally Posted By 6PKRTSE
Car sits just right.
It sure does man!
Posted By:
Dragula
Re: B/E-Body with Front Coil Over Conversion.... -
03/07/18
12:32 AM
450lbs on mine....Been in the car a long time and seem to be perfect.
Posted By:
STEFF
Re: B/E-Body with Front Coil Over Conversion.... -
03/07/18
02:04 AM
Maybe with my Gen 3 in my 70 Road Runner, I could get away with 350 lb spring?
Posted By:
Dragula
Re: B/E-Body with Front Coil Over Conversion.... -
03/07/18
02:07 AM
Originally Posted By STEFF
Maybe with my Gen 3 in my 70 Road Runner, I could get away with 350 lb spring?
Do you have glass fenders and bumper and hood? My G2 is also all aluminum...its light for a big engine.
Posted By:
STEFF
Re: B/E-Body with Front Coil Over Conversion.... -
03/07/18
02:08 AM
Glass hood only.
© 2024
Moparts Forums