4 Port Regulators

Posted By: Hot 340

4 Port Regulators - 03/04/18 11:56 PM

Who makes a good deadhead one these days? MSD/Mallory regs are out of sight pricewise (saw a deadhead for $355~ish). Not a cheapskate, but they are ridiculous. Whose you running?

Posted By: Bad340fish

Re: 4 Port Regulators - 03/05/18 12:07 AM

It looks like this is just a three port but the price is good.

http://www.robbmcperformance.com/products/regulator_dh.html

Posted By: sgcuda

Re: 4 Port Regulators - 03/05/18 12:16 AM

I like the Magnafuel one.

https://www.summitracing.com/parts/mrf-mp-9433/overview/

Posted By: Hot 340

Re: 4 Port Regulators - 03/05/18 12:16 AM

I like Robb's stuff👍...but I want a 4 port for a tunnel ram.

Posted By: Cab_Burge

Re: 4 Port Regulators - 03/05/18 02:09 AM

I've used BG, Magnafuel and Product Engineering dead head four ports regulators on the dyno and in my E85 bracket car with no problems with any of them

I've also used two of the little Holley blue ones on a tunnel ram

Posted By: max_maniac

Re: 4 Port Regulators - 03/05/18 05:59 AM

I just installed this one. It's about $220

https://proshop.summitracing.com/parts/hly-12-707/overview/

Posted By: 6PKRTSE

Re: 4 Port Regulators - 03/05/18 05:01 PM

I have Magnafuel for both my tunnel ram & both nitrous systems.

Attached picture rsz_20160414_201152.jpg

Posted By: Al_Alguire

Re: 4 Port Regulators - 03/05/18 05:06 PM

We use Magnafuel or Weldon. I prefer the Weldon regulator for a lot of reasons.