In the shed

There is a bit going on
440 on the right is a 11.5-1 10.90 engine that has been rebuilt and is going back in my sons Valiant, we did have the 547 (middle) in it for a year of fun and getting a 9.99@135 pass in
Engine in the Barracuda is a 528 roller cam (10.10@135) thing that has crapped a lifter and cam so the 547 in the middle is getting bearings and all the top end off the 528 then going into the Barracuda.
The 528 will then get freshened and I will have to make a choice between roller again or flat tappet.
Mocked up Max Wedge is a 67 HP 440 .030 block that I just scored for $50, about $40 usd .
The bonus of all this is I get to spend a lot of time in the shed with my son, priceless

You don't have to go whacko to run a roller cam. Something with .660 to .700 lift and they are phenomenal in power and reliability. Looks great! Keep crackin'!

Should be out on track this weekend then , hey

Tex

Looks like fun. Ron

Building a lot of nice stuff, and a lot of good memories.

"Mocked up Max Wedge is a 67 HP 440 .030 block that I just scored for $50, about $40 usd".

Hmmmm....wonder where I can score somthing like this...oh yeah, guess only
in Aussie land. Or build a time machine...