Posted By: DusterKid
moparplate with alternator - 02/28/18 05:13 PM
Can you guys post some pics of your motorplate with alternator setups. Looking to go that route in the future and just want to see how others have done their's and what all I might need to do the swap, since I currently use a stock alternator and brackets.
Posted By: 6PKRTSE
Re: moparplate with alternator - 02/28/18 06:41 PM
Mine is similar to the others pictured.
Posted By: 605ply
Re: moparplate with alternator - 02/28/18 09:16 PM
https://www.dropbox.com/s/b39yjyg1b6q224o/2016-06-13%2019.50.24.jpg?dl=0this is from a few years back ,i'm not using this anymore....
i didn't have room lower.. worked fine
Posted By: CMcAllister
Re: moparplate with alternator - 02/28/18 09:27 PM
No picture, but mine was turned around "backwards" with the pulley end towards the back of the car, due to a lack of room, and mounted to a frame rail. An alternator will work running backwards.
Posted By: DusterKid
Re: moparplate with alternator - 02/28/18 10:39 PM
Will be an A body with stock k frame and BB, so room is limited, so ideas are good.
Posted By: AndyF
Re: moparplate with alternator - 02/28/18 11:58 PM
I have a stock K frame in my BB Duster. The small Denso alternator fits in there just fine.
.JPG "DSC_1308 (Large).JPG")
Posted By: hemi-itis
Re: moparplate with alternator - 03/01/18 04:22 AM
This is the large body GM 100 amp 1 wire mounted with the Jegs SBC chrome $30 mount in a 63 "B" body.
Posted By: dvw
Re: moparplate with alternator - 03/01/18 12:14 PM
I cut the adjusting slot into the plate itself. Welded a pivot extension to the water pump housing.
Doug
