Slant 6 Torsion Bars 622 / 623 Install Sides

Hi folks, yesterday I received my slant 6 622 / 623 torsion bars but I've some doubts about sides of installation. Which one is Driver and Passenger side.

With Mopar part numbers the right is the even last number and left is the odd number. There are a few exceptions though so I don't know about those bars specifically.

Thanks GJ.

I found this information in another forum:

There are numbers stamped into the end of the torsion bar which will identify what diameter bar it is, but you to have the bar removed to see it. There's usually some paint splotch too...different diameters have different colours.

A-body Slant 6
.83" - yellow - 622/623(R/L early) 880/889(late)

A-body 2-bbl V8
.85" - Olive - 624/625(R/L early) 890/891 late)

A-body 4-bbl V8
.87" - Blue - 626/627(R/L early) 892/893(late)

My bars has the yellow color spots also...

Even part numbers on right side of car (passenger side). Paint splotches to the rear of the car if you care about that. LH bar should have two splotches, RH bar has one splotch.

Thank you Andy! I really appreciate your help.