A-body K-frame and front susepnsion dimensions

The winters are long here in MI, and I am looking to start playing around with some front suspension ideas that have been brewing, but my A-body is 1000 miles away at the moment.

I have a couple of "Body dimension" sheets from the service manuals. I know it is a long shot, but I was wondering if anyone had dimensions, or a 3D model of the factory front suspension, with pick up locations, geometry, etc. Anything you wanted to share would be a big help.

Thanks in advance!

i'm currently working on my dart and am going to swap out k frames. your welcome to come down and grab some measurements if no one has any prints. i'm a little less than an hour south.

Kits are expensive.Wished they were as cheap as a Fox body

Thanks, that would be great!




Agreed.
Part of me wants to hit the "easy button" and get a kit, but part of me wants to be different.
I will force myself out of a lot of "stock suspension" classes that allow the coilover conversions, but I don't have much class anyway. The plan is to try to adapt fox spindles and struts, and tie the upper strut mount into the downbars of the cage. The LCA, strut rod and rack will all mount to a K-frame instead of "front halving" the car...

That is the goal anyway...

Outlawed,have you seen this tread?https://board.moparts.org/ubbthreads/ubbthreads.php/topics/1721119/test-pic-68-turbo-dart-project.html
He may be doing same thing. I had same idea years ago and picked up a fox body universal strut kit with springs and r&p that is for sale.(pm if interested)
But i went the easy route with an aftermarket K.