Hemi ARP bolts

Posted By: cudaman1969

Hemi ARP bolts - 01/21/18 05:57 PM

Been meaning to ask for awhile, do they make different length 426 Hemi head bolts? Reason being after test fitting the head, the under intake bolts seam too short, blocks been decked 1/8. I run a fair amount up in the head and then with washer on hardly any threads left for the nut. Anyone else run into this problem?

Posted By: 71birdJ68

Re: Hemi ARP bolts - 01/21/18 06:49 PM

They didn't use bolts under the intake, they were studs.

Posted By: Hot 340

Re: Hemi ARP bolts - 01/21/18 06:49 PM

World style block? They use a longer valley boss than stock

Posted By: Dragula

Re: Hemi ARP bolts - 01/21/18 11:23 PM

Yes.....

Different block & head combos use different bolts and studs. It can get expensive quick if you end up buying the wrong lengths...

Posted By: cudaman1969

Re: Hemi ARP bolts - 01/22/18 01:30 AM

Originally Posted By 71birdJ68

They didn't use bolts under the intake, they were studs.

My god you're so right

Posted By: cudaman1969

Re: Hemi ARP bolts - 01/22/18 01:32 AM

Originally Posted By Dragula

Yes.....

Different block & head combos use different bolts and studs. It can get expensive quick if you end up buying the wrong lengths...

They came with the package,
but I guess I did buy them.
Thanks for the info