Chassie builder NE Ohio area

Well just like the post says I need one .. willing to travel .. within reason .. need a 7.50 chrome moly cage and a few other things done.. stock frame car .. let me know who you all are using .. thanks John

I recently talked to a fellow out of Akron that has 2 NMCA cars (7 second cars). He has his cars done in Rochester NY. I forgot the name of the chassis shop but if interested PM me and I can get it. He is anal/meticulous and this is the only guy he trusts.

Damn you sure are stepping it up!!! This with the Dart?

Did you try Ben Holt or its a Short drive to Bob George Racing in Pa

7.50 is a lot to ask thru stock frame rail. Is it rule thing? I'd be doing a tube back half and covering it with the stock appearing rails. Not mention then the inner structure of the body and rockers could be gutted for weight. Will get pricey quick.
Doug

It’s a rule thing, no Russ this is for the Duster, Dart is getting 3/4 chassis to stay within the rules ..

ProSport just had a roll bar put in from a buddy close to him in akron. I think he runs a actual chassis shop, he may be able to do what you need.

Prosport has some pics of his new roll bar on one of his posts, and I noticed a tag from the builder tacked on to the bar advertising his shop, looked like nice work to me. If he can do it , hes fairly close..

Chassisfab Performance. My Cuda goes in next month. Small shop. Dennis Chumita is great to deal with. Had plenty of time to talk with me and answer a ton of questions and show me around. There were several small tire mustangs there and I believe mid 60's vette getting a 7.5 cert cahe. The owner was keeping the stock frame.
330-608-2288 if you want to talk to him.

Yes, my buddy Dennis at ChassisFab Performance^^^.
Tallmadge Ohio, he does nice affordable work.

I had a 8.5o cert done in my car from a local guy here in Syracuse ny .
He said 2 weeks and it was done 2 weeks to the day .
It's a long drive for you though .
Oh he races a pro mod and does real nice work .

Did you try to contact Bondo Bob he’s in Ohio and very nice work

I tried getting a hold of bondo bob but got nothing back .. everywhere I go seems to be a dead end ..

There was a shop called BullDog racing in eastern Ohio but I would check with prior customers.
PS: The shop is BIG Dog Fabrication in Stow,Ohio Big Dog Fabrication

Did you try Chassis fab as well??

Give Dennis a call John, or stop by his shop if you want.

Darren was no help ? I sent you a PM

Holt's in Columbus Oh. John and Ben have a lot of nice and fast cars out of their shop, everything from bracket cars to nitrous cars and their work top notch.

M&M Chassie buy Quaker City Raceway. He does nice work.

Pentagon race cars is the one who does Scott Guiler's stuff in NY. He's really good.

The 7.50 cert in a stock body is tricky to do correctly. We have done quite a few,though, as that is how we have to build our SS/AH stuff.

If there is anything we can do to help, please feel free to call.

Ben Holt
John Holt Race Cars
614.471.1022