Posted By: Dragula
Need a oiling schematic for Indy block - 10/19/17 06:25 PM
We are on to something. I need a schematic for all the holes the the oil pump intersects with.
Posted By: Dragula
Re: Need a oiling schematic for Indy block - 10/20/17 12:48 AM
Ok...can some map out the holes in the block where the pump attaches?
Posted By: Dragula
Re: Need a oiling schematic for Indy block - 10/21/17 12:32 AM
The amount of help on here is stunning...
Posted By: pittsburghracer
Re: Need a oiling schematic for Indy block - 10/21/17 01:31 AM
Half the guys don’t build their own engines and out of the other half how many guys have Indy blocks. Limited crowd you are talking to
Posted By: Anonymous
Re: Need a oiling schematic for Indy block - 10/21/17 01:44 AM
I'm sure if you contact BG they would help you out. Bob is a pretty outstanding guy.
Posted By: sgcuda
Re: Need a oiling schematic for Indy block - 10/21/17 03:23 AM
I've never seen a flow chart for the oiling system on an Indy block. Don't even know if one exists.
Posted By: sgcuda
Re: Need a oiling schematic for Indy block - 10/21/17 03:25 AM
Mine is on an engine stand. Can I help with something? RB solid block, if it matters.
Posted By: jyrki
Re: Need a oiling schematic for Indy block - 10/21/17 07:12 AM
I have one on the floor. It's pretty much like factory stuff, except no internal pick up. Instead, there is a provision in front of the block for a pick up hose. From the pump the oil goes to passenger side and from there outside of the lifter bores, to the rear of the block and mains. Can check today if you can explain what you are looking for so that I understand it.
Posted By: Al_Alguire
Re: Need a oiling schematic for Indy block - 10/21/17 07:21 AM
I don't recall ever seeing one either. I don't have any way to make one either. Maybe if you ask a specific question we can help but it is pretty much as jyrki describes..
Posted By: an8sec70cuda
Re: Need a oiling schematic for Indy block - 11/01/17 02:22 PM
Yall ever figure out why this thing won't build oil pressure?
Posted By: Dragula
Re: Need a oiling schematic for Indy block - 11/02/17 12:32 AM
Yup....Some worn out/bad fittings and hose it seems. I need to order parts before I know if there is anything else.