Posted By: mopar dave
Msd reluctor wheel pickup gap - 10/18/17 10:31 PM
Whats the best gap beteen the pick up and the reluctor wheel?
Posted By: Dave Hall
Re: Msd reluctor wheel pickup gap - 10/19/17 12:29 AM
.050-.080 are the MSD specs.
Posted By: mopar dave
Re: Msd reluctor wheel pickup gap - 10/19/17 02:44 AM
wow, that's way more than I was guessing. I think those are the same specs as the crank trigger sensor. The firecore distributor I had was .010". I only measured one reluctor tooth on my MSD and it measured .018". looks like I need to adjust it.
Posted By: plycuda
Re: Msd reluctor wheel pickup gap - 10/19/17 03:31 AM
the reluctor in the distributor is only 20-30 if I remember right. 50-80 is for a crank trigger
Posted By: Dave Hall
Re: Msd reluctor wheel pickup gap - 10/19/17 03:55 AM
Sorry, thought you were asking about a pickup for the crank trigger. My bad...
Posted By: mopar dave
Re: Msd reluctor wheel pickup gap - 10/19/17 04:39 AM
ok, thanks guys. with mine at .018 would that be a problem?