Posted By: mopar dave
400-3 indy intake - 10/08/17 08:39 PM
I think this intake has some mixture issues after a lot of web reading and my experiences. Where would be a good place to send it to that can fix it? I want someone that knows the intake and has fixed these before.
front and rear cylinders run richer than the centers. May be some power on the table there. thanks
Posted By: AndyF
Re: 400-3 indy intake - 10/08/17 08:59 PM
Posted By: mopar dave
Re: 400-3 indy intake - 10/08/17 09:09 PM
Very nice Andy. Yeah i would like that. $800 is a little pricey, but will see. Any Idea how much it picked it up? From what i'v read they are bad out of the box.
Posted By: AndyF
Re: 400-3 indy intake - 10/08/17 09:13 PM
I didn't do a back to back with a ported intake and an unported one but the porting was probably worth 20 hp or so.
Posted By: mopar dave
Re: 400-3 indy intake - 10/08/17 09:15 PM
ok, cant do any thing this year, but beginning of next will send it some where. will yours be for sale about that time?
Posted By: AndyF
Re: 400-3 indy intake - 10/08/17 10:47 PM
Not sure if I'll sell my Wilson Indy intake. I did have my Wilson M1 4500 intake up for sale but no takers at $900.
Most economical thing you can do with that intake is to send it to Hughes for their deep port match. They do a good job and the cost is fair. I think it in the $200 range.
Posted By: mopar dave
Re: 400-3 indy intake - 10/08/17 10:52 PM
I was just on their site lookin to see what they had to offer. thanks