Plugs and plug wire recommendations needed

Its been awhile since I posted but I'm buttoning up my build and I'm to the point where I'm in need of some info on plugs and wires for my junk.
HEI style dizzy
E85 fuel
Indy 440-1 heads
10-15 psi of boost
Big block low deck in a abody

NGK & firecore

Ngk and firecore here

NGK plugs and either MSD or Taylor for wires.

NGK plugs and I got some purple Taylor wires.

Autolite plugs and MSD wires

Tell em what it is 😆
I know your about to fire it. You better post vids 👌

I wish I was closer so I could help.

Thanks guys

Fastmop ill get some video and post it up.

There's only a couple minor things left to do and I hope to have things buttoned up minis the turbos plumbing By next week.

NGK and Taylor Spiro pro wires.last set I had on for at least 15 years.Thats with headers on a BB.Run them on everything.Replaced mine because they looked nasty but still worked like new.Rocky

You guys running the NKG plugs do you have a part number I see there's a couple different ones that will work?

NGK 5671 -10 is what I'd start with.
Doug

NGK and Firecore, going to order another set of custom wires today.

Thanks Doug is 10 the heat range? On my old e85 turbo setup the slant liked a 7 heat range plug gapped at .028.

I run a R5671A-9. Stock number 5238
I run a tighter gap

Ordered my custom length firecore wires at 11:55 got a shipping notice email at 1:01 have to like that turn around

12 Years ago I dynoed a new set of firecore wires vs a new set of msd. Dyno operator said I was wasting my time until he seen the results got over 5 hp from nothing but the wire change. This was on a 735 hp pump gas engine.
Been my first choice ever since.

NGK and Moroso Ultra 40 wires.

I run NGK or Autolite plugs and use Firecore plug wires which are great. I have also used Taylor wires which worked good for me. Ron

David if you ever come back up north me and the wife have a place for you to stay.

Where are you at in Mich

Anyone happen to have the part number for a WIX oil filter I need to pick a couple up thus week.
I cant figure out how to post pics using my photebucket account and I cant resize them via my phone.

Just south of Jackson about 5 mins from MIS I grew yp in wayne county.

51515... 51515R is the race filter and it
flows more but has less filtration

I had to download a app to downsize a couple pics

The car has come along way in the last year
Swaped to big bolt pattern disk
Dana60 swap with disk brakes.
Mini tube
Anti roll bar installed
Upgrade the roll bar to a 10pt cage with funny car add on

Who did your headers.. nice job

Mr P everything was done by me In my 2 car garage expect tig welding alum I got a friend to do it as I haven't tired my hand at it yet.

Nice job on the headers
EDIT
yeah I use to do all my work out of my 2 1/2
car garage till I leveled it and built a
larger shop a few years back

Very nice setup.

Thanks Mike
Yah a pole barn/shop is next on my list of things to do. I'm over rolling around on the ground and ive out grown my working space with the equipment needed to tackle a job like this. Its probably been the worst part of this build.

Thank you

Here's a couple pics during the mock up stages

I know what ya mean.. I built the place I have
now and built it the way I wanted.. it has in
floor heat which is really nice.. I also have
a mill and lathe in there along with a 10 ton
hoist.. I also have a large sand blaster and
a bunch of other things.. I sold off my tubing
bender that I used to build chassis's since I
quit building them now days... when you do build
just make it BIGGER than you want.. they are NEVER
big enough

Mike it sounds like you set your shop up about like what I had envisioned mine could be, except Id like a paint booth at one end of the building. Maybe one day I can make it a happen.🐸🐸👌

I had a temp paint booth in my shop when I was
painting my Rampage.. but to me a paint booth
isnt worth the time.. you only use it once in
a great while