My 1966 Dodge Dart NA small block cast intake 8.55/158.48mph

We have been struggling with converters for this new engine but Vic Bloomer sent me one of my old part number ATI converters to put in and engine likes it much better.

Still little tight goes to about 7000 at the hit I really need 7500 (60' soft a good bit)
Shifting around 9300-9500 rpm still trying to see what it wants/likes.

Turn it up and ride along. (I did lift a tick in second gear) you will hear that in video.

https://youtu.be/AiqWDU55Isk

Nice, how many cubes? I watched that more times than I should have haha

Sweet

My first time in a 8 second ride ....Lol

It's so easy to go 8s when Brett is your friend.. definitely had to hit the like button on that one..foot break

Brett's car is awesome!

so sick !!!

Great run. But what is that blip at 27 seconds? Is that just the video or did the motor burp, like ignition stutter or something?

Car shook and I lifted.

https://brettmiller.smugmug.com/Car-pictures/i-hcwK8fX/A

Very nice👍

That's smokin' right along! 5.46 @ 127 in the 1/8.

A few of these bad dawg small blocks are quite the screamers........

Very impressive for sure

411CI
2940lbs car on the line.

158.5@2940 shows right at 900hp on the Moroso slide rule.

Nice!!

Mighty impressive

Wallace is showing 930hp.. according to the ET..and considering it was a low-rpm footbrake launch. And he peddled it. I think the car can go much quicker.. Wallace and some of the other calculators. I believe are based off the perfect pass..

It goes without saying Brett and the car impress.
Doug

Very cool car! Love the Bogarts!

Love it!

Sounds real good at 9500rpm+!

Very cool Brett. I have no doubt it will get quicker as you rub on the combo.

One of the most impressive Mopars around. Man that thing sounds insane, I too watched the video about 17 times.

How many laps does a combo like that go before it needs to be freshened?

Kevin

Pretty good for a man who's hobby it is

Wow! That car does NOT look like an 8 second ride. You could take a lot of lunch money with that thing

Id like to know what the specifics are on the trans. I like my small block tractor motor, watching that tach and listening to her scream had my teeth grinding!! Awesome ride!

Anyone know how that weight compares to a SS/AH A-body?

Nice job Brett!

It's a 904 that I built has A&A input and output shafts.
We lightened a stock sunshell TCS high gear,TCS return spring and turbo action forward manual valve body.

Awesome, sounds REAL good!

Man, that car is incredible! Love it!

Wow! More than impressive.

Must have a pretty good set of heads and a manifold to match. :-)

Bill

Just bad-azz!!!

That’s a bad b(/):$:&&. Lol

SS/AH are 3200lbs min.