511 Alive and well once again.

511 Dyno 837.6 HP

Back together and ready to go back in Barney. Here is the just of the build.
400 block with a Callie's 4.25 Dragonslayer
13.5-1 Diamond pistons
Indy EZ-1 heads flowing just under 370 @ .700
TTI 2 1/8 step headers
Indy single plane with 1050 Dom
Custom solid roller 268/276 with a hair over .700 lift

Peaked at 837.6 @ 6700 and carries nice till 7100

Because we never cut the cloverleaf out of the Manifold it does better with no spacer. I'm fine with that for hood clearance. Should be able to fit a 5" element in it this way.

It sounded real strong. Should work well.

Biggest issue is finding time and motivation to swap it out with the 440 with a drug problem.
Maybe next week.
I'd post a dyno sheet but Photobucket want $ from me.

Sounds like a nice build. Goodluck and have fun

Thanks. Finding ambition to pull a perfectly good 440 out is my hurdle right now.

Sounds like a beast.........

Those are good results

I knew it would run over 8. Just wasn't sure how much?

Well that answers my question. Saw the video first, came here to check 😂

Funny.

Great stuff, so it is going in the SuperBee in your sig ? 9.50's ??

Maybe with spray. NA at my weight won't run that low.

Very nice! Put the plate on the big motor too!

Thanks. Hope to have some track #'s next Friday.

Hey nice job Wookie !
That's just the combo I may be heading for....

I didn't know the EZ-1 could do so well...I called Indy today and they wanted to sell me the Big EZ for my 67 Barracuda....

I wonder how headers fit with 400 block and these heads in an A body

Dan

I am spoiled in a B body with an Alterkation front end. Tons of room. I know anything in an A body can be a pain. Helped an bud put a 400 in his Duster last year. Inner fenders were removed and it was still a pain.

Cool build! Whats your car weigh?

The lo deck Maddogs fit my 67 barracuda nice. Needed a few dings but easy install. Took about 10 minutes on pass side. They are a slip tube design. Dr side takes a little longer with the steering box and colume to deal with.

I am at the low low weight of 4100 at the line with full cell and tubby manning the wheel.

4100 kilo or pounds

Pounds.

If it was kilo it would be 9020 pounds. Yikes.

yes it is, ask me how I know. LOL

That dyno sheet should give you plenty of ambition

Yeah probably get started Sunday night. Has to be running Wednesday so I can load Thursday. Weather forecast changed though and not looking great for next Friday.

If you cant find the ambition, could I use the 511, just to test it for you

I am sure many would line up to test.

Sounds like she will push your Charger down the track very fast. Gotta love the bigblock wedge Mopars ! Good luck with it. Ron

It is sitting in car. Should be all back together no later than tomorrow night. All ready for Friday night test and tune.

Wookie !
Show us a pic of the progress !!

What headers are you using ?

Dan
67 Barracuda...at rest without an engine..

Photobucket wants $ from me and it isn't happening. Any other ways to post a photo?
Got it running tonight. Get the hood on tomorrow and check things over. Should be ready to test Friday.

How to attach a picture has been posted many times. After you finish your post, click on File Manager below the post. It opens a new window and asks you what picture you'd like to attach. I use the "Browse" button and find it on my computer. Open the pix on my computer, it appears in the new window. Hit Add Picture. If you have another picture go back to Browse and get it. When you're done, hit Done Adding Pictures

picture test

Thanks, as you can see it worked, Thanks again

511 running in car

Here is a video.

Sounds angry!

Hope mine sounds that good.

Ran 10.21 @ 133 with a 1.45 60 foot. All smiles here.

Well done

Tex

10.21 @ 133 with 1.45 60

What RPM are you shifting it at?
It sounds like it likes to rev, mine did

That was 7000. It likes RPM. Not stumbles or hiccups at all. 60 is down a bit from spray which I expected. Maybe an adjustment will help not sure? Have tach video I'm going to send Lenny and see what he thinks?

What gear ratio and size tire ?
Dan

4.30 with a 30"