Rear end yoke, Dana 60, which style is stronger?

My Dana currently has a yoke w/ 2 bolts and a metal strap that retains the 1350 u-joint. A buddy gave me a Moser yoke that has 2 u-bolts....Any sig. difference between the 2 strength wise? Performance wise? Thanks

The through U bolts are preferred I do believe...

Not trying to sway you in either direction but you
have to look at a couple of things. The heaviest load
carrying rear end is a big dana in trucks.... what do
they use... the straps and bolts. Also look at the design
of a yoke... the U-joint cup sets in OVER 1/2 way so
the load is applied to the yoke.... not the strap.
I've been running a strap type for 11 years on my car
(same ones and the same bolts). The strap is there
for 1 thing only... thats to hold the drive shaft/
U-joint from sliding forward

Quote:

---

I've been running a strap type for 11 years on my car
(same ones and the same bolts).

---

I've never had any issues with the straps......