stage v rocker shaft stand question

getting my hemi back together and i torqued down the heads and now i was looking at the torque for my stage v rocker shaft stand bolt torque.....book says 30 ft lbs of torque....that would be for cast steel stands right?.....these are stage v aluminum stands.....would it be less?.....i dont want to strip them out

thanks

The bolts hold the shafts into the stands, there is no load on the bolts so 25 to 30 ft. lbs. with oil should be fine
Anti seize might be better than oil for future maintenance

thanks....

I still torque mine to 30 ft. lbs. even though I also have aluminum stands.