Mopar race hemi orange paint gone forever

P4120751AB Mopar race hemi orange paint is no longer being mixed!!!!!

Any other 62-64 race hemi orange rattle can companies out there that mix it?

I thought it was crap paint anyways.. took way
too many coats to get it to cover

Check with totally auto.

Thank GOD for miracles.

Now when Chevy orange is gone the world will be one step closer to a livable planet.

Autobody paint shops can mix the Hemi Orange paint via formula from paint 'chip' code and put it into rattle cans or quarts or gallons for gun spray. Even here in California. This doesn't seem to be a Big Deal?

Mopar hasn't had decent engine paint in a long time, Good riddance
Check Summit and Jegs sites, many choice on Hemi engine paint out there, maybe one you like for race hemi Tangerine

I guess I'll tell you my secret.
Krylon Pumpkin Orange. Exact duplicate.

I bet Frank Baldason has the correct paint. How many people know that wedge engine orange is different than Hemi orange? And there are different shades of Hemi orange.

KBS Motor Coater.....

POR 15 Hemi Orange is the best.

The last two engines I've done I had the local paint supply shop mix it for me and just sprayed it on with a trim gun.

Pretty much Case Tractor orange with a little flake in it, but I do like the color

Rust-o-leum Federal safety Orange.

Didn't know they made it in colors.

https://www.summitracing.com/parts/poi-42188/overview/

That's the stuff Pittsburgh, needs to be thinned down to run through a gun, covers in one coat, I get 4-5 engines out of 1 can and shelf life is years after you open

Try Bill Hirsch

I always thought the race hemi orange was too close to chevy orange. Last 3 engines got dupli color ceramic chrysler red. Its orange with more red in it. IMO its a very nice color with better contrast to black covers and other accessories.

I believe Mopar used the 1963/64 max Wedge Orange as the 1965 and 1968 Race hemi orange
the 1966 to 1971 Street Hemi orange has the flake in it, not the Race Hemi paint

I would say you are correct, same same.

I agree and the best looking color imo

Psssst!

Don't tell anyone but I would spray some good quality Chevy orange on my engine, then cover it with the junk Mopar Hemi Orange

I must be the only one that hates orange engines.

Nope... most of my engines are gloss black..cheap
and easy.. on a few I spray them body color..but I
wont waste my money on the MP paints.. I cant count
how many cans wouldnt spray or quit at a half of
the can...I got the MP paints at work so I used it
and didnt care if only half on it would come out..
I would get 12 cans at a time and throw out the cans
that didnt spray

Their paint color (and their Street Hemi orange) was so far off color they should have been arrested for fraud. They buy this from an outside vendor. Why didn't they just tell the people to mix the proper shade of orange? It's impossible to figure out how this works. As stated above call Totally Auto. It's expensive, and the shipping is expensive, but you are driving a Mopar so you understand. In a more perfect world you would order a can of Race Hemi orange from Mopar and it would be right. (How could it be wrong?)

I've been using por-15 engine paint and pretty happy with it so far. Next thing is see how well it holds up. It definitely covers great... I do add hardener and reduce it.

I used to have various orange, red etc urethane I would mix myself to get the shade I wanted, but ran out of it. I would use urethane and put a coat of clear on.

No you're not.

Real engines a BLACK.


Unless you do body color.

For years it always seemed many bought 'race' hemi orange was by mistake. They really wanted 'street'...and most were kind of disgusted how yellow the race stuff was.

Nothing is really gone forever unless tooling or (in the case of chemicals) formulations are scrapped.....

The Turquoise paint has always been good. Had good luck with it. I had a customer send back an entire case of it because it looked too green to him and he didn't like it. It looked perfect and covered beautifully.

The old Pre-AB street hemi orange was as thin as water, covered badly, and was really bad to work with. They fixed it when they went AB and changed suppliers but by then, a certain reputation had been created.

The old 318/340/273 red was always pretty good too.
I used quite a bit of it.

That is a nice contrast. Nice looking motor!

I use PlastiKote #226 Chrysler orange.

Covers well, is glossy and wears well.

Yes, it is out of a can but it's easy to touch up when I scratch it.

For the last 20 years,or up to 5 years ago I always had good luck with the Mopar Performance RACE hemi orange.I did like the hue better than the street hemi orange.I still have 5 cans in stock.if I'm lucky I can get 2 cans to spray till empty.I'll deal with new paint next time the engine is out.It survived 5 years this go round!

I'm a simple person. Black unless it an aluminum block and that stays aluminum. LOL

I'm going to have to give that pumpkin orange a try. The Mopar street hemi orange is not the correct color and it looks like Chevy orange.......Yuck>>>>>>>>>>>>>> I did like the race hemi orange color from Mopar but the paint used was not the best.


Thanks,

dk

I asked Frank about this, and he said that early Hemi orange was used from 66 up to 691/2, then for 70- 71 they had a different Hemi orange. He didn't mention the Max wedge orange or race Hemi orange. Hemis were painted at the marine plant, and the wedges were painted wherever they were built, and were a different color. The air cleaners were painted by the vender that made them, and was different.

Maybe I shouldn't say this but... I take my air hose with 100 psi and shoot a blast down the rattle can tube (with the nozzle off) replaces the lost propellant, starts spraying again, works on most all cans of whatever. The one with the tube sticking up works easiest. On second thought, I didn't tell you this. Terrible visions are upon me.

Thats what my brother uses all the time. Its not perfect but close enough. I may use it on my next eng I paint as I used the Plastic Coat and I am not happy as it has peeled in a few spots on my eng. I ended up finding some model car touch-up paint at a Hobby shop to touch up the spots that peeled on my eng. I plan to try the Rust-o-leum orange on my next one as it seems to hold up well. Ron

Yep, just have them mix up EK2 body color without the metallic.